Skip to main content

vvdi2 full configuration detail function list

Question: I have the vvdi2 device with the basic one. How much will it cost me to open it to the full package?
Answer: i advise you to sell you vvdi 2 device with the basic one (sv86-c)
since it's 2500 usd for full configuration
 but if you get a new vvdi2 full configuration, it's 1700 usd
that is it's 1700 usd for vvdi2 device + full configuration:
1) VV-01 VAG 4th immobilizer: activated!
2) VV-02 VAG Audi 5th immobilizer: activated!
3) VV-03 VAG copy 48 transponder by OBDII: activated!
4) VV-04 Copy 48 96 bit: activated!
5) VV-05 VAG MQB immobilizer: activated!
6) VB-01 BMW OBD: activated!
7) VB-02 BMW CAS4: activated!
8) VB-03 BMW FEM/BDC: activated!
9) VP-01 Porsche immo data tool: activated!
10) VPSA-01 PSA: activated!
11) VK-01 Transponder Programmer: activated!
12) VJ-01 Passthru J2534: activated!
13) Toyota H Activation: activated!
BMW full configuration for vvdi2:
http://www.xhorsetool.com/wholesale/vvdi2-bmw-software-all-authorization-service.html
VAG full configuration for vvdi2:
http://www.xhorsetool.com/wholesale/vvdi2-full-vag-authorization-service.html
Link to vvdi2 configuration:
http://www.xhorsetool.com/producttags/vvdi2-authorization.html
 
note 1: the language is different from vvdi2 software
VVDI2 for BMW: English, Italian, Spanish, Polish, German, Hungarian, Chinese
VVDI2 for VAG: English, Polish, Spanish, Chinese
VVDI2 for Porsche: English, Polish, Spanish, Chinese
VVDI2 for PSA: English, Polish, Spanish, Chinese
VVDI2 Transponder programmer: English, Polish, Spanish, Chinese

Labels:

Comments

Post a Comment

Popular posts from this blog

Good to Know VVDI2 PassThru J2534

Confirmed!  VVDI 2 J2534  work with pass-thru Ford, and even avdi work also. I test the two For the SAE J2534 pass-thru device being used, select the device manufacturer and follow the list below Correct the selected pass-thru device to the PC Select "Save device" Select "Exit application" Restart module programming Note: If no devices are listed below, the software that was received with the pass-thru device was not installed. Exit the app, install the software and restart module programming Good to know:  VVDI2 PassThru J2534 Configuration software supports Third–Party software to connect to VVDI2 for communication. Third Party software should support SAE J2534 function. And now it supports VAG diagnostics software: OIDS, VAS5054 and others. You can find detail in VVDI2 – PassThru J2534 User Manual. PassThru J2534 is available in both VVDI2 basic and full function version. VVDI2 Version VVDI2 full function VVDI2 Basic version Price 2499 usd 46...
Post a Comment
Read more

VVDI2 VAG 4th 5th immo key programming

VVDI2 VAG mainly supports Diagnostic, 4th immobilizer, 5th immobilizer, key learn, BCM remote control, Engine control unit, Kline instrument and immobox, adapt unit, component protection, dump tool etc for VW, Audi, Seat, Skoda. VVDI 2 VAG also support 4th immobilizer Porsche, 4th immobilizer Bentley. Here are  Xhorse VVDI2 VAG Commander function list and car list. ALL functions below can be realized with VVDI2 full kit  or  VVDI2 VAG VVDI II VAG Commander Diagnostic: Support TP2.0, UDS, KWP1281, KWP2000 protocol, have internal database, can display every item in detail Identification: read the detail information for target unit Coding: Set unit coding Actuator test: Test every small actuator in target unit Read DTCs: Read trouble codes Clear DTCs: Clear trouble codes Basic settings: Complete basic settings for target unit Security access: Login with PIN code, usually use before adaptation Adaptation: Set new value in channel Custom requests: You can wr...
Post a Comment
Read more