Skip to main content

Test report: VVDI2 CAS4/CAS4+ thru OBD

Test report: VVDI2 CAS4/CAS4+ thru OBD
Car: BMW 730LD (CAS4+ 5M48H)
connect the vvdi2 machine to the car thru obd port and the laptop
go to VVDI2 BMW software
select CAS4/CAS4+ F series
get key info
VVDI2 read out key info
unlock cas4/cas4+
warning:
- you are gonna perform cas4/ca4+ programming function. it will take 10 minutes
- you must provide extra power to the car before programming
- if all keys are lost, please press the brake and open light to activate communication
unlocking cas4/cas4+...
cas4/ca4+ unlock success1
you can make a dealer key or reset km via obdii
select a key position
prepare a dealer key with a programmer
having a working key
switch ignition on with a working key
insert the working key to ignition switch
prepare record the following information
info saved at : My document - vvdi2 - cas4
put the original key into vvdi2
put the new key into the vvdi2 programmer
key  is written successfully
go to the car with the key
no need write back eeprom
the car started successfully
the remote function worked well
Success! VVDI2 can add CAS4/CAS4+ keys thru OBD2. Done!
Note: CAS4/CAS4+ by OBD is activated for users with
1.  vvdi2 full kit:
2. vvdi2 with BMW full configuration: (with/without fem/bdc config.)
It's a free function.  But you should have the new sw: at least 6.6.1
Labels:

Comments

Post a Comment

Popular posts from this blog

Good to Know VVDI2 PassThru J2534

Confirmed!  VVDI 2 J2534  work with pass-thru Ford, and even avdi work also. I test the two For the SAE J2534 pass-thru device being used, select the device manufacturer and follow the list below Correct the selected pass-thru device to the PC Select "Save device" Select "Exit application" Restart module programming Note: If no devices are listed below, the software that was received with the pass-thru device was not installed. Exit the app, install the software and restart module programming Good to know:  VVDI2 PassThru J2534 Configuration software supports Third–Party software to connect to VVDI2 for communication. Third Party software should support SAE J2534 function. And now it supports VAG diagnostics software: OIDS, VAS5054 and others. You can find detail in VVDI2 – PassThru J2534 User Manual. PassThru J2534 is available in both VVDI2 basic and full function version. VVDI2 Version VVDI2 full function VVDI2 Basic version Price 2499 usd 46
Post a Comment
Read more

VVDI2 MQB Mileage Correction Review

VVDI2 MQB Mileage Correction Review + Tip :  have made many. without problems. But it is important that the car's battery is intact and fully charged. I always put charger on the car when programs. to avoid voltage drops during the road. as this can cause problems. Try to repeat the process.
Post a Comment
Read more

Xhorse VVDI2 Remaining Synchronization Time Definition

What does Xhorse VVDI2 "remaining synchronization time" refer to: You will see the message - "remaining synchronization time: xx days" on the top of the VVDI2 interface The number of days is from 30 to 0, display in a circle The counting numerals in reverse order to 0 It means that the VVDI2 unit is synchronized with the Xhorse factory once per month (30 days) When it turns to be "0 days", the VVDI2 will automatically synchronized with the Xhorse Network connection is required to synchronization Once synchronized, vvdi2 would get update information from the Xhorse server. And "remaining synchronization time" will back to "30 days" The days are NOT related to the use of authorization service such as vvdi2 5th AUDI Authorization vvdi2 BMW OBD Authorization vvdi2 BMW CAS4 + Authorization vvdi2 BMW FEM/BDC Authorization Tech support from http://www.xhorsetool.com/ Laura Edited
Post a Comment
Read more