Skip to main content

VVDI2 BMW V4.3.0 makes FEM BDC keys in 3 steps

VVDI2 BMW V4.3.0 FEM/BDC system key make and KM reset functions are newly available.




1.support make new key with ignition switch(support adding spare key and all key lost, all key lost require ISN)

2.support reset FEM/BDC KM(cluster require reset manually)

3.support erase key(after erasing the key position become blank position)

4.support backup coding

5.support restore coding

VVDI2 BMW V4.3.0 FEM/BDC system function is optional, the supplier could help you in the authorization of VVDI2 FEM / BDC, you could contact email at: sales@xhorsetool.com for a best price and after-sale service.

VVDI2 BMW V4.3.0 makes FEM / BDC keys in 3 steps: get key info->programming FEM/BDC system->make keys

Tips:

1.backup coding and restore coding can direct operation generally.

2.add keys, reset KM, erase key must programming FEM/BDC system first

3.in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use "BMW E-sys software" program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW

4.when operation on 'programming FEM/BDC system 'interface, please don't close this software window until all procedures completed.

5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.

6.programming FEM/BDC system, must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem (such as the remote control cannot start the car

or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system

7.if connect power to FEM/BDC module, but the relay keeps ringing, please contact technical support for help. Usually operation on FEM/BDC should be ok, just need to program.

Product details:

Xhorse VVDI2 Full version:

Labels:

Comments

Post a Comment

Popular posts from this blog

Good to Know VVDI2 PassThru J2534

Confirmed!  VVDI 2 J2534  work with pass-thru Ford, and even avdi work also. I test the two For the SAE J2534 pass-thru device being used, select the device manufacturer and follow the list below Correct the selected pass-thru device to the PC Select "Save device" Select "Exit application" Restart module programming Note: If no devices are listed below, the software that was received with the pass-thru device was not installed. Exit the app, install the software and restart module programming Good to know:  VVDI2 PassThru J2534 Configuration software supports Third–Party software to connect to VVDI2 for communication. Third Party software should support SAE J2534 function. And now it supports VAG diagnostics software: OIDS, VAS5054 and others. You can find detail in VVDI2 – PassThru J2534 User Manual. PassThru J2534 is available in both VVDI2 basic and full function version. VVDI2 Version VVDI2 full function VVDI2 Basic version Price 2499 usd 46...
Post a Comment
Read more

Xhorse VVDI2 BMW Key Programmer Review

Here is the Xhorse  VVDI2 BMW  reviews: i did yesterday  CAS1 bmw  read eeprom by obd and got key info and cutting code vvdi2 bmw can make key in bmw ews direct by obd or need read ews dump by programmer then make key i have a vvdi2 with vag and bmw authroization have to programmed new keys in bmw ( bmw e90 2008 USA year ), without keyless go in original key inside transponder pcf7953 315mhz My hint for you: Chinese keys work only transponder but remote need to remove cas and do it on bench on tango or xhorse vvdi, but obd method need always original for better chance chip is 7945 or 7953 which is 46 family good luck Xhorse vvdi2 v1.2.1 adds support for  MED17/EDC17  dump tool, support clone ECU(Menu->Special Function->MED17/EDC17 dump tool) But sadly only work for Condor key cutting machine users my vvdi 2 is full not basic.but function for edc17 only for condor cutter user.no for all vvdi2 full user.  vvdi mb bga ...
Post a Comment
Read more

VVDI PROG 4.6.5 Review

VVDI-PROG download link: https://mega.nz/#!DpJRGZJC!3jrjbFDLpiOB-IgO5wCna8Nzt6A3twmh9oJgMMmc6U8 Password:123456   Xhorse VVDIPROG v4.6.5   released notes:   * This version DON't need update firmware * Fix some bugs + Add VVDI PROG USER MUNUAL 4.6.5 version in Doc folder + Update V850 D-Flash format conversion tool, support insert with original 64KB file * Fix EEPROM CLIP ADAPTER R&W some chips error problem * Fix EWS3 ADAPTER sometimes insertion check error problem * Fix 35080/D80 ADAPTER erase some 35080VP first 32 Bytesfailed problem + Add MC68HC05B32(0D60J), MC68HC05B32(3G96A), MC68HC705B16(1K20C) options in <2-MCU>-><MOTOR...
Post a Comment
Read more