Here is the Xhorse VVDI2 Key Pogrammer FAQ by ser, hope can help you.
FAQ:
1. Q: I do have BMW X5 from 2013+ , it's F15 with CAS4+ I guess and 5M48H, it has all keys lost. What equipment I should buy from you to make a new key?
A: 1) For 5M48H, you need to use XPROG or VVDI pro to read the date
2) Use BMW MULTI TOOL or VVDI 2 do CAS4+, and use the data you read out to generate the key data to match programming and simultaneous car
For second steps. If you choose BMW MULTI TOOL, you still need to buy the CAS4 adapter. If you choose VVDI2, then no need to buy others.
2. Q: I want to open component security function. what should i do?
A: For this function. If you want to use, you need to open pin,mac reading,CS authorization then can use. If you have bought the condor key cutting machine. Then this authorization is free to open. Please give us your name/country/EmailVVDI SN/ VVDI2 SN / CONDOR SN. If you do not bought CONDOR key cutting machine, then cannot open this authorization.
3. Q: Hello. I purchased this product and it says at the top... re synchronization in 23 days.. How do you re synchronization the device...Thank you.
A: This is normal. Once the day become 1, you just need to connect interent. Then it will be back to 30 days again. This is setted by Xhorse company to avoid others crack their software.
4. 06 range rover sport CEM read ok, made a key with VVDI2 immo data tool.. Great!
A: One user feedback “I did one of these but now how do i add a remote key .. i tried with skp900 to add pcf7941 but it didn’t work.. Is it possible to add a remote key? ? And how please”
if you reset a PCF, you no longer have an option to go back to life, you need a lot of information to be able to use it again, you need flasheROM and eep-extended, it does not only work with hitag pages.
Another option is that they (Xhorse) can give, is to create a firmware download as bmw, for other models
And I think that option will not be available, because to do so removed the vvdi-tools
Another option is someone who passes the firmware for the pcf and remote you need. that option I think no one will give it freely.
What you have left is to leave the PCF blank and your investigate.
If for some reason a manufacturer makes the mistake and does not block the PCF and you are lucky to take that full firmware already have an option for your investigation.
I would also be interested in your firmware :-)
5.Q: Did you do via via OBD or read dump from bcm2 for safety, there is a case here where attempting to read data via OBD bricked car.
A: It was newbie and he did all key lost by OBD. If you read manual carefully you will see that all key lost need to read BCM2 by BDM first.
Also all keys lost possible by obd. Have to disconnect the bcm2 module then reconnect it in the process. Done a few a4s and q5s all keys lost without problems.
FAQ:
1. Q: I do have BMW X5 from 2013+ , it's F15 with CAS4+ I guess and 5M48H, it has all keys lost. What equipment I should buy from you to make a new key?
A: 1) For 5M48H, you need to use XPROG or VVDI pro to read the date
2) Use BMW MULTI TOOL or VVDI 2 do CAS4+, and use the data you read out to generate the key data to match programming and simultaneous car
For second steps. If you choose BMW MULTI TOOL, you still need to buy the CAS4 adapter. If you choose VVDI2, then no need to buy others.
2. Q: I want to open component security function. what should i do?
A: For this function. If you want to use, you need to open pin,mac reading,CS authorization then can use. If you have bought the condor key cutting machine. Then this authorization is free to open. Please give us your name/country/EmailVVDI SN/ VVDI2 SN / CONDOR SN. If you do not bought CONDOR key cutting machine, then cannot open this authorization.
3. Q: Hello. I purchased this product and it says at the top... re synchronization in 23 days.. How do you re synchronization the device...Thank you.
A: This is normal. Once the day become 1, you just need to connect interent. Then it will be back to 30 days again. This is setted by Xhorse company to avoid others crack their software.
4. 06 range rover sport CEM read ok, made a key with VVDI2 immo data tool.. Great!
A: One user feedback “I did one of these but now how do i add a remote key .. i tried with skp900 to add pcf7941 but it didn’t work.. Is it possible to add a remote key? ? And how please”
if you reset a PCF, you no longer have an option to go back to life, you need a lot of information to be able to use it again, you need flasheROM and eep-extended, it does not only work with hitag pages.
Another option is that they (Xhorse) can give, is to create a firmware download as bmw, for other models
And I think that option will not be available, because to do so removed the vvdi-tools
Another option is someone who passes the firmware for the pcf and remote you need. that option I think no one will give it freely.
What you have left is to leave the PCF blank and your investigate.
If for some reason a manufacturer makes the mistake and does not block the PCF and you are lucky to take that full firmware already have an option for your investigation.
I would also be interested in your firmware :-)
5.Q: Did you do via via OBD or read dump from bcm2 for safety, there is a case here where attempting to read data via OBD bricked car.
A: It was newbie and he did all key lost by OBD. If you read manual carefully you will see that all key lost need to read BCM2 by BDM first.
Also all keys lost possible by obd. Have to disconnect the bcm2 module then reconnect it in the process. Done a few a4s and q5s all keys lost without problems.
Comments
Post a Comment