Skip to main content

VVDI2 Basic Version,What it can do?

What is VVDI2-BASIC?
VVDI2 BASIC is VVDI2 with basic functions only.
The VVDI2 Basic Functions include Transponder Identification, Transponder Configuration /  Manipulation, and Eprom Key Programming by Dump similar to the functions found in the a Tango Programmer.  The VVDI2 Basic will also test frequency of a Remote Transmitter and has the ability to Generate Xhorse Universal Wired and Wireless Remotes(Requires Additional Cable For Wired Remotes). In addition the VVDI2 Basic does not need to be connected to a PC to identify Transponder Types or test Remote Transmitter Frequency.  All of these Basic Functions are also included with the Full Version of VVDI2.
Add more vehicle models
VVDI supports diagnostic function only for VAG groups, but VVDI2 has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI2 can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.
Plug-in function, reserved connectors
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can read and write Benz IR key, can program key for old and new Mercedes–Benz, can connect BMW plug to realize OBD function, and meanwhile reserve some connectors for further uses.
The core function is to detect the remote control frequency
Automatically identify chip type
Support multi-function on VW vehicles
Read BMW ISN
Key programmer
Remote control programmer
J2534 compatible adapter
1. Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
2. Support VAG vehicle diagnostic function
Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
3. Support OBD functions on BMW vehicles.
Correct odometer
Generate key
Unlock key
Fix CAS computer
4. Key programmer
Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
5. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including: ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
If you are looking for VW, BMW or FEM functionality, you can add them here: 
Labels:

Comments

Post a Comment

Popular posts from this blog

Good to Know VVDI2 PassThru J2534

Confirmed!  VVDI 2 J2534  work with pass-thru Ford, and even avdi work also. I test the two For the SAE J2534 pass-thru device being used, select the device manufacturer and follow the list below Correct the selected pass-thru device to the PC Select "Save device" Select "Exit application" Restart module programming Note: If no devices are listed below, the software that was received with the pass-thru device was not installed. Exit the app, install the software and restart module programming Good to know:  VVDI2 PassThru J2534 Configuration software supports Third–Party software to connect to VVDI2 for communication. Third Party software should support SAE J2534 function. And now it supports VAG diagnostics software: OIDS, VAS5054 and others. You can find detail in VVDI2 – PassThru J2534 User Manual. PassThru J2534 is available in both VVDI2 basic and full function version. VVDI2 Version VVDI2 full function VVDI2 Basic version Price 2499 usd 46
Post a Comment
Read more

VVDI2 MQB Mileage Correction Review

VVDI2 MQB Mileage Correction Review + Tip :  have made many. without problems. But it is important that the car's battery is intact and fully charged. I always put charger on the car when programs. to avoid voltage drops during the road. as this can cause problems. Try to repeat the process.
Post a Comment
Read more

Xhorse VVDI2 Remaining Synchronization Time Definition

What does Xhorse VVDI2 "remaining synchronization time" refer to: You will see the message - "remaining synchronization time: xx days" on the top of the VVDI2 interface The number of days is from 30 to 0, display in a circle The counting numerals in reverse order to 0 It means that the VVDI2 unit is synchronized with the Xhorse factory once per month (30 days) When it turns to be "0 days", the VVDI2 will automatically synchronized with the Xhorse Network connection is required to synchronization Once synchronized, vvdi2 would get update information from the Xhorse server. And "remaining synchronization time" will back to "30 days" The days are NOT related to the use of authorization service such as vvdi2 5th AUDI Authorization vvdi2 BMW OBD Authorization vvdi2 BMW CAS4 + Authorization vvdi2 BMW FEM/BDC Authorization Tech support from http://www.xhorsetool.com/ Laura Edited
Post a Comment
Read more